Powder Silo | Bidragon Steel Silos
A powder silo from Bidragon is a steel container for powder storage, or a powder vessel, used in multi-system solid storage. The product documentation states that a range of powder storage silos is offered and describes them, in the company's own terms, as eliminating insect and chemical-residue risks. That claim is reported here as a company statement, not as an independently verified fact.
Powder handling is governed by flow behaviour, dust control and discharge reliability, and those factors are normally settled per material rather than per generic silo type. The powder silo page itself gives no independent diameter, capacity or construction figure, so none is stated here.
Key features
- Powder storage container for multi-system solid storage
- Range of powder storage silos offered (product documentation)
Specifications
| Item | Specification |
|---|---|
| Use | Powder storage / powder vessel |
| Diameter / capacity | Not stated on this product page — confirm in inquiry |
Values in this table come from the product documentation for this product only. Where a value is not listed, it is marked as to be confirmed in inquiry, and it must not be taken from another product on this site.
Applications
Powder silos serve plants handling fine and powdered materials across industrial processes. The inquiry should state the powder, its flow behaviour, the dust control requirement and the discharge method, because those factors decide the configuration.
How this product fits in a storage line
Industrial silos are normally planned around the material and the process, not around a generic capacity figure. Flow behaviour, dust, moisture, temperature and discharge reliability decide whether a given structure, bottom configuration and dust control arrangement will work, and the same nominal size can behave very differently with different materials. A buyer comparing industrial silos should therefore state the material, the handling rate and the downstream equipment in the inquiry, and should check which fittings, such as level sensors, dust collectors and discharge aids, are included in the proposal.
What to confirm in your inquiry
Because silo requirements depend on the material, the site and the handling system, the following items are confirmed per project before any quotation is issued. Sending these details with your inquiry helps the supplier respond with a workable proposal rather than a generic price.
- Material to be stored, including bulk density, moisture content and flow behaviour, and whether the material is free-flowing or prone to bridging.
- Required storage capacity and any future expansion allowance, together with the available footprint and height limit at the site.
- Discharge method and downstream equipment, such as a screw conveyor, a pneumatic conveying line or a packing machine.
- Roof and bottom configuration, including whether a flat bottom, hopper bottom or elevated arrangement suits the discharge and foundation plan.
- Ventilation, level measurement, temperature monitoring and dust control requirements, where the stored material or local rules call for them.
- Surface protection and coating requirements, the installation method available at the site, and the delivery scope expected from the supplier.
- Any applicable design standard or local code that the project must follow, so that the proposal can be checked against it.
Where a value is not listed on this page, it is not a standard figure for this product. It is a project-specific figure to be confirmed in writing during the inquiry process, and it should not be assumed from another product on this site.
Related products
Request a quotation for this product. Specifications that are not listed on this page, including capacity, dimensions and delivery scope, are confirmed per project through the inquiry form. Send an inquiry →